USB driver for Autocom cdp pro cars.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 3-08-2021, 02:21 | Programs for cars and diagnostics | Views: 2 060 | Comments: 0
Author: carsoftos777 | 2-08-2021, 21:22 | Programs for cars and diagnostics | Views: 2 552 | Comments: 0
Description: The hardware and software complex is designed for diagnostics of electronic equipment of Opel / Vauxhall / Holden cars from 1992 to 2012.
Author: carsoftos777 | 2-08-2021, 18:05 | Programs for cars and diagnostics | Views: 2 147 | Comments: 0
The VCDS 11.11.3 diagnostic complex is a further development of the well-known VAG-COM with a HEX-USB + CAN adapter and is used to diagnose cars of the VAG group (VW, Audi, Seat, Skoda until 2012)
Author: carsoftos777 | 2-08-2021, 17:28 | Programs for cars and diagnostics | Views: 2 628 | Comments: 0
TECU v3.7.0.11 is designed to diagnose almost all cars. Works with both regular K-line adapter and ELM327 adapter.
At the moment, the program supports diagnostics of the main blocks of Toyota cars starting somewhere in 1996 (when the K-line appeared on the car) and around 2006 (before cars switched to the CAN bus). I would like to draw your attention to the fact that for Toyota there are diagnostic modules for hybrid vehicles in the program. For Toyota, all protocol parameters are taken from the dealer-level program - Techstream. In addition to Toyota, the program has support for diagnostics of Nissan vehicles (so far through the K-line). The protocol for Nissan has been collected bit by bit from various sources and is currently from the dealer's CONSULT-III instrument. For Daihatsu vehicles with HC-EJ engine, the protocol is taken from a multiscanner that supports this type of engine.
At the moment, the program supports diagnostics of the main blocks of Toyota cars starting somewhere in 1996 (when the K-line appeared on the car) and around 2006 (before cars switched to the CAN bus). I would like to draw your attention to the fact that for Toyota there are diagnostic modules for hybrid vehicles in the program. For Toyota, all protocol parameters are taken from the dealer-level program - Techstream. In addition to Toyota, the program has support for diagnostics of Nissan vehicles (so far through the K-line). The protocol for Nissan has been collected bit by bit from various sources and is currently from the dealer's CONSULT-III instrument. For Daihatsu vehicles with HC-EJ engine, the protocol is taken from a multiscanner that supports this type of engine.
Author: carsoftos777 | 2-08-2021, 17:06 | Programs for cars and diagnostics | Views: 8 508 | Comments: 0
VAG K + CAN Commander 1.4 VAG K + CAN Commander is used to correct odometers, read vehicle security access codes, reset airbag errors, activate the TV in motion (VIM) function on VAG vehicles.
Author: carsoftos777 | 2-08-2021, 16:41 | Programs for cars and diagnostics | Views: 2 440 | Comments: 0
Vag com 409.1 is a car diagnostics program, version 409.1, this program is unique and has no analogues in its segment, the bulk of people use this particular program in car diagnostics - due to its fairly large capabilities, a simple and intuitive interface.
Author: carsoftos777 | 2-08-2021, 15:32 | Programs for cars and diagnostics | Views: 5 418 | Comments: 0
ScanXL ™ Professional v3.5.1 - a program for car diagnostics using the OBDII (OBD2) protocol for the ELM327 adapter.
Diagnostic software for Ford, Lincoln, Mercury (1996-2009), GM (1996-2009), Mazda (1996-2009) cars - by OBDII (OBD2) protocol for ELM327 adapter. The ScanXL Professional program is not a dealer program, but it has a lot of factory parameters of automakers in its base. In addition to the factory parameters, there are a large number of configurable design parameters. Including, you can create such parameters yourself.
Diagnostic software for Ford, Lincoln, Mercury (1996-2009), GM (1996-2009), Mazda (1996-2009) cars - by OBDII (OBD2) protocol for ELM327 adapter. The ScanXL Professional program is not a dealer program, but it has a lot of factory parameters of automakers in its base. In addition to the factory parameters, there are a large number of configurable design parameters. Including, you can create such parameters yourself.
Author: carsoftos777 | 2-08-2021, 13:28 | Programs for cars and diagnostics | Views: 3 619 | Comments: 0
WinOLS 2.26 is designed for editing the firmware of electronic control units (ECU) of cars of different brands.
Author: carsoftos777 | 1-08-2021, 23:22 | Programs for cars and diagnostics | Views: 2 204 | Comments: 0
WinOLS 2012 is designed for editing the firmware of electronic control units (ECU) of cars of different brands.
Author: carsoftos777 | 1-08-2021, 23:01 | Programs for cars and diagnostics | Views: 1 949 | Comments: 0
