Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws and take out the two pistons that secure the trim over the grille.
-we release the hood latch cable.
-depending on which side we will disassemble, turn the wheels.
-we release the lining of the wings (hold on the latches, starting from the bottom, pull towards you).
-in the wheel wells, take out the caps and release the fender liner (no need to remove).

More details

How to remove the front and rear bumper Cadillac STS

Author: carsoftos777 | 10-05-2023, 23:03 | How To Remove Bumpers | Views: 464 | Comments: 0

Depending on the year of manufacture and body type, the attachment points differ.

-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-turn the wheels to the side.

More details

Carista 7.4 Pro Full

Author: carsoftos777 | 10-05-2023, 20:25 | Programs for cars and diagnostics | Views: 1 569 | Comments: 0

Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.

More details

How to remove front and rear bumper VW Amarok

Author: carsoftos777 | 10-05-2023, 20:22 | How To Remove Bumpers | Views: 960 | Comments: 0

-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-at the bottom, Unscrew the screws (spun up).
-remove the license plate together with the frame and Unscrew the two screws under it.
-remove the decorative overlays of fog lamps (hold on latches).
-Unscrew the screws and remove the fog lights, Unscrew the screws behind them that secure the bumper.
-turn the wheels to the side.

More details

How to remove front and rear bumper Opel ZAFIRA B (2005-2011)

Author: carsoftos777 | 10-05-2023, 18:32 | How To Remove Bumpers | Views: 670 | Comments: 0

-under the hood take out the caps that secure the grille (inserted from top to bottom).
-remove the grille from the lower latches upward.
-under the grille, Unscrew the screws.
-turn the wheels to the left or right side, depending on which side we will disassemble first.

More details

BimmerLink for BMW and Mini 2.29.0-5264 Full

Author: carsoftos777 | 10-05-2023, 17:24 | Programs for cars and diagnostics | Views: 1 128 | Comments: 0

BimmerLink for Android is the direct link to your BMW or Mini. Using an OBD adapter you can read trouble codes or display sensor values in realtime, check the current state of the DPF in your car or register a new battery after replacement. BimmerLink even allows you to remotely control the exhaust flap or mute the Active Sound Design in your car.

More details

Ford Fiesta MK5 2006 Workshop Manual

Author: carsoftos777 | 8-05-2023, 14:23 | Auto repair manual / Ford | Views: 1 269 | Comments: 0

Description: Service documentation for the repair of the engine, chassis, transmission of the car Ford Fiesta MK5 (2002-2008). Electrical diagrams are presented in a separate file.

More details

BimmerCode 4.13.2-11165 for BMW and Mini Full

Author: carsoftos777 | 7-05-2023, 15:13 | Programs for cars and diagnostics | Views: 1 234 | Comments: 0

BimmerCode 4.13.2-11165 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.

More details

BMW Inpa Diagnosis Coding Programming (6.2) [1990-2023]

Author: carsoftos777 | 7-05-2023, 14:18 | Programs for cars and diagnostics | Views: 4 100 | Comments: 0

Description: Until recently, the BMW Inpa/Ediabas engineering complex was used by the personnel of all divisions and branches of the BMW concern for the development, debugging and testing of electronic control units for all cars produced by the concern. In addition to engineering functions, the complex also has comprehensive diagnostic capabilities. Due to its original purpose, the scanner provides access to any car ECU. Functions for reading real-time parameters and testing actuators allow you to check the correct operation of any control, be it a button or a potentiometer. If desired, you can monitor the position of each air damper of the climate control unit or adjust the volume of the radio using a personal computer connected via the diagnostic connector.

More details

How to remove front and rear bumper Peugeot 307

Author: carsoftos777 | 7-05-2023, 13:43 | How To Remove Bumpers | Views: 710 | Comments: 0

-open the hood.
-under the hood take out the caps (inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, take out the caps and release the fender liner (the fender liner can not be completely removed).

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes