Navigation

Top News

  • VAG DPF 4.44.15 Full
  • ETKA 8.1 (1639) 01.2026 + VIN database 2864000 pcs. Full
  • Dash-Tool V1.3 By Auto-Electronic
  • ETKA 8.2 (1636) 01.2026 + VIN database 2864000 pcs. Full
  • E OBD2 Facile 3.82.1145 Full
  • PET 2 Porsche 8.0 (851) 01.2026 + VIN database 21,692 pcs. Full
  • French firmware package for Renault, Peugeot, and Citroen with EDC15 and EDC16 ECUs
  • Kia and Hyundai turbodiesel firmware with EDC15 ECU
  • BMW (diesel) firmware with Bosch EDC16 and Bosch DDE4.0 ECUs
  • Car radio calculator vw technisat ulvwmp3 7E0035156

    • Statistics

    Advertisement

    СarSoftos.com » Page 277

    How to remove the front and rear bumper of the BMW 6-series E63 (E64)

    Author: carsoftos777 | 26-03-2023, 19:49 | How To Remove Bumpers | Views: 687 | Comments: 0
    How to remove the front and rear bumper of the BMW 6-series E63 (E64)


    -unscrew the wheels left or right, depending on which side you will unscrew first
    -in the wheel wells, you need to Unscrew the screws that secure the fender liner to the bumper.
    -under the hood, remove the seal (pull off towards the engine), and Unscrew the bolts under it that secure the upper part of the bumper.
    -remove the lower grille and fog lamp trims (attached with latches).
    -under the gratings, Unscrew the four screws (spun up)
    -pull off the corners from the side latches and pull the bumper towards you (in order not to scratch the paint on the wings, it is better to do it together).
    • LIKE
    • 3
    More details

    VAG dataflash [23.03] Full

    Author: carsoftos777 | 26-03-2023, 16:28 | Programs for cars and diagnostics | Views: 5 901 | Comments: 0


    Description: The database includes firmware files for VAG: Audi, Volkswagen, Skoda, SEAT, Bentley, Lamborghini, MAN for software: ODIS and VCP (Vag Can Pro).
    • LIKE
    • 5
    More details

    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)

    Author: carsoftos777 | 26-03-2023, 16:20 | How To Remove Bumpers | Views: 348 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)


    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and nuts.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper AUDI A4 B6

    Author: carsoftos777 | 26-03-2023, 16:12 | How To Remove Bumpers | Views: 453 | Comments: 0
    How to remove the front and rear bumper AUDI A4 B6


    The bumper is not as difficult to remove as it might seem at first glance.
    -at the edges at the bottom of the bumper, remove the decorative grilles, for this you need to press the latches with a flat screwdriver.
    -under the gratings, Unscrew the two bolts for the internal hexagon (there are under the asterisk), which are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    -Unscrew the screws that secure the fender liner to the bumper.
    • LIKE
    • 3
    More details

    HTTWIN for Windows x64 bit (NTVDMX64) 1.4 [ENG] Full

    Author: carsoftos777 | 26-03-2023, 15:39 | Programs for cars and diagnostics | Views: 2 237 | Comments: 0


    Description: As you know, running HTTwin on a 64-bit system is very difficult. HTTWin is the very first diagnostic for Mercedes and all old cars are diagnosed only with it.
    Today, a way to install and run the HTTWin program on a 64-bit system using NTVDMX64 is already available.
    • LIKE
    • 4
    More details

    How to remove the front and rear bumper AUDI A7

    Author: carsoftos777 | 26-03-2023, 04:37 | How To Remove Bumpers | Views: 983 | Comments: 0
    How to remove the front and rear bumper AUDI A7


    The bumper is removed along with the grille.

    -under the hood take out the caps and remove the trim over the grille.
    -Unscrew the screws under the trim (spun down).
    -Unscrew the screws around the perimeter at the bottom (spun up).
    -turn the wheels to the left or right side, depending on which side we will disassemble first.
    -in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper Peugeot Partner (Citroën Berlingo) (1996-2002)

    Author: carsoftos777 | 26-03-2023, 04:29 | How To Remove Bumpers | Views: 629 | Comments: 0
    How to remove front and rear bumper Peugeot Partner (Citroën Berlingo) (1996-2002)


    -open the hood.
    -under the hood, Unscrew the screws, take out the caps and remove the grille.
    • LIKE
    • 3
    More details

    Carly OBD2 for BMW and Others 48.65 Full

    Author: carsoftos777 | 24-03-2023, 20:46 | Programs for cars and diagnostics | Views: 788 | Comments: 0
    Carly OBD2 for BMW and Others 48.65 Full


    Description: A program for testing the computer of BMW cars.
    Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper Renault Kangoo 1 (1998-2008)

    Author: carsoftos777 | 24-03-2023, 20:37 | How To Remove Bumpers | Views: 794 | Comments: 0


    Bumper mounts. Arrows indicate screws and caps.
    Depending on the year of manufacture, the attachment points differ slightly.
    Despite the external differences (depending on the year of manufacture), the Renault Kangoo 1 (1998-2008) bumpers are mounted in approximately the same way and very simply. Everything will be clear from the images, and there is nothing special to describe here.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper AUDI A4 B5

    Author: carsoftos777 | 24-03-2023, 20:34 | How To Remove Bumpers | Views: 510 | Comments: 0
    How to remove the front and rear bumper AUDI A4 B5


    The bumper is removed very easily, and the whole job takes 10-15 minutes.
    attachment points of the front bumper AUDI A4 B5-at the edges in the lower part of the bumper we remove the decorative grilles, for this we unscrew the bolts with a curly screwdriver and remove them from the latches.
    -under the gratings, Unscrew the two hex bolts that are twisted from the bottom up and secure the bumper amplifier to the body (the location of the bolts is indicated by arrows).
    -Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
    • LIKE
    • 3
    More details