Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 11-11-2023, 03:18 | Programs for cars and diagnostics | Views: 1 382 | Comments: 0
Author: carsoftos777 | 11-11-2023, 03:11 | Programs for cars and diagnostics | Views: 1 842 | Comments: 0
Description: CR-injector tester for Delphi, Bosch, Denso, Siemens injectors on the Common-Rail fuel system testing controller CR-Tester CRT-5040.
Injector testing is ensured by applying a control signal from the controller to the injectors under test and maintaining the required pressure in the system according to the selected test plan.
Injector testing is ensured by applying a control signal from the controller to the injectors under test and maintaining the required pressure in the system according to the selected test plan.
-Unscrew the screws along the perimeter of the lower part.
-turn the wheels to the side.
-in the wheel arches, release the fender liners and unscrew the screws that secure the corners of the bumper to the wings.
-turn the wheels to the side.
-in the wheel arches, release the fender liners and unscrew the screws that secure the corners of the bumper to the wings.
Author: carsoftos777 | 6-11-2023, 02:24 | Programs for cars and diagnostics | Views: 728 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
-open the hood.
-under the hood we take out ten pistons (inserted from top to bottom) that secure the trim above the radiator grille.
-take out the two pistons that secure the upper part.
-unscrew the two screws and take out the six pistons (twisted and inserted from the bottom up), which secure the lower part to the fender liners and protection.
-turn the wheels to the side.
-in the wheel arches we release the fender liners.
-under the hood we take out ten pistons (inserted from top to bottom) that secure the trim above the radiator grille.
-take out the two pistons that secure the upper part.
-unscrew the two screws and take out the six pistons (twisted and inserted from the bottom up), which secure the lower part to the fender liners and protection.
-turn the wheels to the side.
-in the wheel arches we release the fender liners.
Depending on the year of manufacture, the mounting locations differ.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
Author: carsoftos777 | 6-11-2023, 01:55 | Programs for cars and diagnostics | Views: 671 | Comments: 0
Description: Program for diagnosing Suzuki motorcycles 1999-2015.
Works with motorcycles via Suziki diagnosis interface box
09904-41010-00
09904-41011-00
09904-41012-00
Works with motorcycles via Suziki diagnosis interface box
09904-41010-00
09904-41011-00
09904-41012-00
Author: carsoftos777 | 6-11-2023, 00:13 | Programs for cars and diagnostics | Views: 3 793 | Comments: 1
Description: Renault Can Clip software, which is a service software that performs maintenance and diagnostics of Renault and Dacia cars. Using the software, it is possible to carry out a complete diagnosis of the ECU of cars (automatic transmission, engine injection, standard xenon, ABS + ESP, climate control, airbags, dashboard, central control system).
Depending on the year of manufacture, the mounting locations differ.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.
Front bumper
-open the hood.
-under the hood we take out the four pistons.
-from the bottom side, unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-depending on which side we will disassemble, turn the wheels out.