Navigation

Top News

  • Pre-installed ODIS Service 25.0.3 and ODIS Engineering 19 [2025] Full
  • JLR SDD 168 + Files Offline [06.2025] Full
  • OBDeleven 0.101.0 Full
  • FSC Tools 2.18 Full
  • PyClip 3 android15_v0.02.24 (1023224) mod Renault Car Diagnostics
  • AlfaOBD 2.4.4.0 Full
  • Obd Mary 1.281 Full
  • ADACT firmware for gasoline BMWs equipped with Siemens and Bosch ECUs.
  • E OBD2 Facile 3.80.1127 Full
  • VW Golf 4 2.3 ME7.1 Engine Firmware Tuning 0261202278 1037363156

    • Statistics

    Advertisement

    СarSoftos.com » Page 237

    How to remove front and rear bumper BMW X5 E70

    Author: carsoftos777 | 18-01-2023, 03:14 | How To Remove Bumpers | Views: 630 | Comments: 0
    How to remove front and rear bumper BMW X5 E70


    -open the hood and unscrew the five screws in front of the radiator.
    -the entire length of the lower part of the bumper, Unscrew the screws.
    -Unscrew the wheels left or right, depending on which side you will unscrew first.
    -in the wheel wells, Unscrew the screws that secure the fender liner to the bumper.
    -we release the edges of the bumper and the upper part under the headlights from the latches and pull it forward (it is better to do this with an assistant).
    BMW X5 E70 front bumper mounting diagram - if there is a parking sensor, remove the common connector.
    -bumper removed.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper of a Chevrolet Captiva

    Author: carsoftos777 | 18-01-2023, 03:10 | How To Remove Bumpers | Views: 1 115 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Captiva


    -under the hood take out the caps that secure the trim and Unscrew the two screws that secure the top.
    -turn the wheels to the left or right side, depending on which side we will disassemble first.
    -in the wheel wells, Unscrew the screws that secure the fender liner.
    -remove the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
    -on the perimeter at the bottom, Unscrew the screws (spun up).
    -with an assistant, release the corners from the latches in the wings (pull towards you).
    -pull the bumper forward.
    • LIKE
    • 2
    More details

    Carly OBD2 for BMW and Others 48.54 Full

    Author: carsoftos777 | 16-01-2023, 03:10 | Programs for cars and diagnostics | Views: 658 | Comments: 0
    Carly OBD2 for BMW and Others 48.54 Full


    Description: A program for testing the computer of BMW cars.
    Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
    • LIKE
    • 2
    More details

    How to remove front and rear bumper BMW 1-series (E81, E82, E87, E88)

    Author: carsoftos777 | 16-01-2023, 03:06 | How To Remove Bumpers | Views: 1 214 | Comments: 0
    How to remove front and rear bumper BMW 1-series (E81, E82, E87, E88)


    Front bumper
    attachment points for the front bumper of the BMW 1-series (E81, E82, E87, E88) - under the hood, unscrew the four screws that secure the bumper to the top bar.
    -at the bottom of the bumper along the entire length, Unscrew the nine screws.
    -Unscrew the wheels left or right, depending on which side you will unscrew first and Unscrew the screws that attach the fender liner to the bumper.
    -move the fender liner to the side and Unscrew two bolts on each side (usually under an asterisk) that secure the bumper to the wing (spun up).
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper AUDI 100 C3

    Author: carsoftos777 | 16-01-2023, 03:03 | How To Remove Bumpers | Views: 420 | Comments: 0
    How to remove the front and rear bumper AUDI 100 C3


    - remove the grille
    -remove trim strip (if any)
    - disconnect the fog lights (if any)
    - unscrew the bolts of the bumper amplifier
    -pull the bumper out of the side rails
    • LIKE
    • 2
    More details

    Scania Diagnos & Programmer SDP3 2.53.3 [2022]

    Author: carsoftos777 | 14-01-2023, 03:34 | Programs for cars and diagnostics | Views: 2 261 | Comments: 0


    Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
    • LIKE
    • 3
    More details

    How to remove front and rear bumper BMW X6 (E71)

    Author: carsoftos777 | 14-01-2023, 03:28 | How To Remove Bumpers | Views: 1 710 | Comments: 0
    How to remove front and rear bumper BMW X6 (E71)


    -open the hood.
    - under the hood, between the headlights, unscrew the five screws (spun down).
    -closer to the wheel arches, under the wings, remove the trim.
    -under the covers, Unscrew one screw on each side.
    -Unscrew the screws around the perimeter at the bottom.
    -turn the wheels left or right, depending on which side you will disassemble.
    • LIKE
    • 2
    More details

    How to remove front and rear bumper BMW X1 (E84)

    Author: carsoftos777 | 14-01-2023, 03:23 | How To Remove Bumpers | Views: 877 | Comments: 0
    How to remove front and rear bumper BMW X1 (E84)


    -open the hood.
    - under the hood, unscrew the four screws (spun down).
    -Unscrew one screw on each side behind the headlights in the wings.
    -Unscrew the screws around the perimeter at the bottom.
    -turn the wheels left or right, depending on which side you will disassemble.
    -in the wheel wells take out the caps and release the fender liner.
    • LIKE
    • 2
    More details

    BimmerCode 4.11.0-10881 for BMW and Mini Full

    Author: carsoftos777 | 14-01-2023, 03:00 | Programs for cars and diagnostics | Views: 1 135 | Comments: 0
    BimmerCode 4.11.0-10881 for BMW and Mini Full


    BimmerCode 4.11.0-10881 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)

    Author: carsoftos777 | 14-01-2023, 02:59 | How To Remove Bumpers | Views: 329 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet Corvette (2004-2012)


    Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and nuts.
    • LIKE
    • 2
    More details