Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Page 232
Author: carsoftos777 | 20-02-2023, 03:02 | How To Remove Bumpers | Views: 446 | Comments: 0
How to remove the front and rear bumper AUDI A3 II


-under the hood, Unscrew the three bolts that secure the grille and bumper to the top bar (the bumper is removed with the bumper).
-along the entire length at the bottom of the bumper, unscrew the screws securing the engine protection to the bumper (it is not necessary to remove the protection).
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew three screws on each side (usually poses an asterisk) that attach the fender liner to the bumper.
  • LIKE
  • 2


-open the hood.
-remove the grille.
-Unscrew one screw (spun down) between the headlights.
-from the bottom, Unscrew the screws that secure the protection.
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, Unscrew the screws that secure the fender liner (front).
  • LIKE
  • 3
Author: carsoftos777 | 18-02-2023, 02:43 | Programs for cars and diagnostics | Views: 1 902 | Comments: 0
EOBD Facile 3.49.0909 Full


Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time
  • LIKE
  • 2
Author: carsoftos777 | 18-02-2023, 02:37 | How To Remove Bumpers | Views: 1 835 | Comments: 0
How to remove the front and rear bumper AUDI A6 C7


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 2


Description: Acronis disk image with Windows 10 LTSC x64 RUSSIAN + ENGLISH (by default), contains both Legacy and UEFI bootloaders.
  • LIKE
  • 4
How to remove the front and rear bumper of a Chevrolet Epica (after 2006)



-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim, Unscrew the two screws that secure the top.
-Unscrew three screws on each side (spun down) and pull out the headlights.
-in the openings of the headlights, Unscrew one screw and take out two caps on each side.
  • LIKE
  • 2


The bumper is removed along with the amplifier.
-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
  • LIKE
  • 2


Description:
– New versions of Porsche Piwis Tester (41.600 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
  • LIKE
  • 2
Author: carsoftos777 | 13-02-2023, 04:03 | Programs for cars and diagnostics | Views: 1 451 | Comments: 0


Description: bimmer-tool allows you to read and delete trouble codes, restore DPF, read engine parameters and much more in BMW cars.
  • LIKE
  • 3
Author: carsoftos777 | 13-02-2023, 03:59 | How To Remove Bumpers | Views: 1 132 | Comments: 0
How to remove the front and rear bumper AUDI A1


-Unscrew the screws around the perimeter at the bottom (spun up).
-turn the wheels to the side, depending on which side you will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and take out one piston (inserted from the bottom up) that attach the bumper to the wings.
-under the hood, Unscrew the three screws that
  • LIKE
  • 2