Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Page 230
How to remove front and rear bumper Chevrolet Epica (2003-2006)


-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-Unscrew the screws and remove the headlights.
-in the openings of the headlights, Unscrew the screws and take out the caps.
  • LIKE
  • 2
Author: carsoftos777 | 15-03-2023, 17:46 | Programs for cars and diagnostics | Views: 2 434 | Comments: 1


Description: Paccar Electronic Service Analyst 5.4.3.0 is a diagnostic tool used for vehicle diagnostics and firmware updates.
  • LIKE
  • 3
Author: carsoftos777 | 7-03-2023, 03:21 | How To Remove Bumpers | Views: 864 | Comments: 0
How to remove front and rear bumper Alfa Romeo 159


-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-Unscrew the seven screws around the perimeter of the bottom (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws that attach the fender liner to the bumper.
-Unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.
  • LIKE
  • 2
Author: carsoftos777 | 7-03-2023, 03:19 | How To Remove Bumpers | Views: 540 | Comments: 0
How to remove the front and rear bumper AUDI Q7


in vehicles with “ACC”, remove the heated badge bracket.
-under the hood take out the caps and remove the cover of the radiator frame.
-under the cover, Unscrew the upper bolts that secure the grille and the upper part of the bumper to the body.
-at the very bottom of the bumper along the entire length, Unscrew the screws that secure the engine protection and fender liner.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-in the wheel arches, Unscrew the screws and take out the caps that secure the fender liner to the bumper.
  • LIKE
  • 2
Author: carsoftos777 | 7-03-2023, 03:17 | How To Remove Bumpers | Views: 559 | Comments: 0
How to remove the front and rear bumper AUDI 100 C4


-remove the decorative grille at the bottom of the bumper
-unscrew and pull out the fog lights (if any)
-behind the fog lights, we unscrew one bolt on each side that secures the bumper amplifier to the body (the location of the bolts is indicated by arrows)
-under the headlights remove the cilia, under which we Unscrew one bolt on each side.
  • LIKE
  • 2


Description: An updated version of ODIS Service 11.0 for diagnosing electronic control units for cars of the VAG group (VW Audi Skoda Seat Bentley Lamborghini).
  • LIKE
  • 8
Author: carsoftos777 | 5-03-2023, 20:16 | Programs for cars and diagnostics | Views: 1 057 | Comments: 0
BimmerCode 4.12.1-10953 for BMW and Mini Full


BimmerCode 4.12.1-10953 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
  • LIKE
  • 2


Description: Spare parts catalog for Massey Ferguson MF8210-8220 tractors.
  • LIKE
  • 2
Author: carsoftos777 | 27-02-2023, 04:50 | How To Remove Bumpers | Views: 939 | Comments: 0
How to remove front and rear bumper BMW 3-series E30


To remove the front bumper, you usually need to unscrew only two bolts (under the internal hex), which are twisted from the bottom up. If the bolts are stuck or the edges are licked, you can unscrew the mounting plates on the bumper (two nuts per side), or disconnect the shock absorbers themselves (three nuts per side), although these options are much more complicated than the main one.
  • LIKE
  • 2
How to remove front and rear bumper of Chevrolet Rezzo (Daewoo Tacuma)


-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-on the perimeter of the lower part, Unscrew the screws that secure the protection.
  • LIKE
  • 2