Description: This manual contains maintenance and repair procedures for the 2016 NISSAN Maxima.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
-open the hood.
-under the hood we take out twelve pistons that secure the trim and the upper part.
-at the bottom, unscrew the four screws and take out the five pistons (twisted and inserted from the bottom up).
-turn out the wheels (depending on which side we will disassemble).
-in the wheel arches we release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners to the wings (twisted from bottom to top).
-release the latches in the wings (pull the corners towards you).
-under the hood we take out twelve pistons that secure the trim and the upper part.
-at the bottom, unscrew the four screws and take out the five pistons (twisted and inserted from the bottom up).
-turn out the wheels (depending on which side we will disassemble).
-in the wheel arches we release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners to the wings (twisted from bottom to top).
-release the latches in the wings (pull the corners towards you).
Author: carsoftos777 | 24-11-2023, 01:45 | Programs for cars and diagnostics | Views: 4 460 | Comments: 1
Description: ODIS Service (Offboard Diagnostic Information System Service) - dealer software for working with VAG group cars (replacing the outdated VAS PC).
Author: carsoftos777 | 24-11-2023, 01:37 | Programs for cars and diagnostics | Views: 1 543 | Comments: 0
BimmerCode 4.20.0-11417 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
Depending on the year of manufacture and body type (restyling, station wagon), the mounting points differ slightly.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the radiator grille.
-around the perimeter of the lower part, unscrew six screws and take out two pistons (twisted and inserted from bottom to top).
Front bumper
-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the radiator grille.
-around the perimeter of the lower part, unscrew six screws and take out two pistons (twisted and inserted from bottom to top).
Author: carsoftos777 | 24-11-2023, 01:31 | Programs for cars and diagnostics | Views: 1 511 | Comments: 0
Porsche Piwis II software is the latest professional diagnostic software for Porshe,the most poweful diagnose and offline programming software for Porsche.
Author: carsoftos777 | 11-11-2023, 03:33 | Programs for cars and diagnostics | Views: 1 187 | Comments: 0
BimmerCode 4.19.1-11411 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
Bumper mounting diagrams. The arrows indicate screws, rivets and latches.
Depending on the year of manufacture, mounting locations may differ.
Depending on the year of manufacture, mounting locations may differ.
Author: carsoftos777 | 11-11-2023, 03:18 | Programs for cars and diagnostics | Views: 1 378 | Comments: 0
Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
Author: carsoftos777 | 11-11-2023, 03:11 | Programs for cars and diagnostics | Views: 1 813 | Comments: 1
Description: CR-injector tester for Delphi, Bosch, Denso, Siemens injectors on the Common-Rail fuel system testing controller CR-Tester CRT-5040.
Injector testing is ensured by applying a control signal from the controller to the injectors under test and maintaining the required pressure in the system according to the selected test plan.
Injector testing is ensured by applying a control signal from the controller to the injectors under test and maintaining the required pressure in the system according to the selected test plan.