Navigation

Top News

  • Pre-installed ODIS Service 25.0.3 and ODIS Engineering 19 [2025] Full
  • JLR SDD 168 + Files Offline [06.2025] Full
  • OBDeleven 0.101.0 Full
  • FSC Tools 2.18 Full
  • PyClip 3 android15_v0.02.24 (1023224) mod Renault Car Diagnostics
  • AlfaOBD 2.4.4.0 Full
  • Obd Mary 1.281 Full
  • ADACT firmware for gasoline BMWs equipped with Siemens and Bosch ECUs.
  • E OBD2 Facile 3.80.1127 Full
  • VW Golf 4 2.3 ME7.1 Engine Firmware Tuning 0261202278 1037363156

    • Statistics

    Advertisement

    СarSoftos.com » Page 207

    How to remove the front and rear bumper of an Alfa Romeo GT

    Author: carsoftos777 | 25-01-2024, 02:20 | How To Remove Bumpers | Views: 325 | Comments: 0
    How to remove the front and rear bumper of an Alfa Romeo GT


    -open the hood.
    -under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
    -Unscrew the screws (twisted from bottom to top) that secure the lower part of the bumper.
    -turn the wheels to the side.
    -in the wheel arches, unscrew the screws that secure the fender liners (no need to remove).
    • LIKE
    • 1
    More details

    EOBD Facile 3.59.1010 Full

    Author: carsoftos777 | 25-01-2024, 02:12 | Programs for cars and diagnostics | Views: 1 094 | Comments: 0
    EOBD Facile 3.59.1010 Full


    Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of Opel CORSA C (2000-2007)

    Author: carsoftos777 | 25-01-2024, 02:08 | How To Remove Bumpers | Views: 274 | Comments: 0
    How to remove the front and rear bumper of Opel CORSA C (2000-2007)


    -under the hood, Unscrew the three screws that secure the upper part (twisted from top to bottom).
    -turn the wheels to the left or right, depending on which side we will disassemble first.
    -in the wheel arches, unscrew the screws and plastic nuts that secure the fender liners.
    -behind the wheel arch liners, Unscrew the nuts.
    -we take out the pistons along the perimeter of the lower part and unscrew the screws.
    • LIKE
    • 1
    More details

    VAG dataflash 24.01 [2024]

    Author: carsoftos777 | 25-01-2024, 02:05 | Programs for cars and diagnostics | Views: 3 102 | Comments: 0


    Description: The database includes firmware files for VAG: Audi, Volkswagen, Skoda, SEAT, Bentley, Lamborghini, MAN for software: ODIS and VCP (Vag Can Pro) up to 01/09/2024 inclusive.
    • LIKE
    • 3
    More details

    How to remove the front and rear bumper of Alfa Romeo 33

    Author: carsoftos777 | 25-01-2024, 02:01 | How To Remove Bumpers | Views: 250 | Comments: 0
    How to remove the front and rear bumper of Alfa Romeo 33


    Despite the external differences, the bumpers of the first (1983-1989) and second (1990-1995) Alfa Romeo 33 series are similar.
    -in the wheel arches, Unscrew the screws that secure the corners to the wings.
    -from the engine compartment side, unscrew the screws that secure the bumper amplifier brackets to the side members.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of Alfa Romeo Stelvio

    Author: carsoftos777 | 25-01-2024, 01:58 | How To Remove Bumpers | Views: 312 | Comments: 0


    Bumper mounting locations. The arrows indicate screws, rivets and latches.
    • LIKE
    • 1
    More details

    ESI tronic 2013.3 Full

    Author: carsoftos777 | 25-01-2024, 01:55 | Programs for cars and diagnostics | Views: 2 390 | Comments: 0


    Description: Esi tronic is a catalog in electronic format, which presents all products manufactured by Bosch. Information on standard hours, fuel injection pump adjustment data, electrical circuits, and diagnostic programs are provided here. You can search for parts by number, as well as search for parts produced by other companies.
    • LIKE
    • 2
    More details

    How to remove the front and rear bumper of a VW Golf 2 (Jetta 2)

    Author: carsoftos777 | 25-01-2024, 01:52 | How To Remove Bumpers | Views: 273 | Comments: 0
    How to remove the front and rear bumper of a VW Golf 2 (Jetta 2)


    To remove the front bumper, you need to “hang the engine” using a jack; to do this, place a wooden block between the engine and the jack and lift it so that the weight of the engine falls on the jack.
    -from under the car, unscrew two bolts on each side (you only need to unscrew those bolts indicated by the arrows)
    -pull the bumper off the guides towards you.
    • LIKE
    • 1
    More details

    Scania Diagnos & Programmer SDP3 2.58.3 [2024]

    Author: carsoftos777 | 25-01-2024, 01:48 | Programs for cars and diagnostics | Views: 1 211 | Comments: 0


    Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
    The program is designed to ensure the operation of the electrical system in the CAN network.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a Toyota Carina E

    Author: carsoftos777 | 25-01-2024, 01:44 | How To Remove Bumpers | Views: 255 | Comments: 0
    How to remove the front and rear bumper of a Toyota Carina E


    -open the hood and unscrew the screws (twisted from top to bottom), remove the radiator grille.
    -Unscrew the screws and pull out the piston under the radiator grille.
    -remove the direction indicators.
    -under the direction indicators, Unscrew one screw on each side.
    -unscrew the screws along the perimeter of the lower part (twisted from bottom to top).
    • LIKE
    • 1
    More details