How to remove the front and rear bumper Renault Wind

-open the hood.
-under the hood, pull out the pins and unscrew the screws that secure the upper part.
-along the perimeter of the lower part, unscrew the screws and pull out the pins.
-turn the wheels to the side.
-in the wheel arches, release the fender liners (front part).

-move the fender liners to the side and unscrew one screw on each side that secure the bumper corners to the fenders.
-release the latches in the fenders (pull the corners towards you).
-pull the bumper forward (look for the wires).
-disconnect the electrical equipment connectors (if any).

Rear bumper

-open the trunk lid.
-remove the taillights.
-under the taillights, unscrew one screw on each side.
-unscrew the two screws in the trunk opening.
-unscrew the screw under the license plate.
-unscrew the screws from the bottom.
-release the fender liners in the wheel arches.

-move the fender liners to the side and pull out one pin on each side that secure the bumper corners to the fenders.
-release the latches in the fenders (pull the corners towards you).
-with an assistant, pull the bumper back (watch the wires).
-disconnect the electrical equipment connectors.
Tags: