How to remove the front and rear bumper Chevrolet Volt

-open the hood.
-under the hood, remove the lining.
-under the trim, Unscrew the screws and take out the caps that secure the top.

-on the perimeter of the lower part, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-depending on which side we will disassemble first, turn the wheels.
-in the wheel wells, Unscrew the screws.

-release the latches in the wings (gently pull the corners towards you).
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment.

Rear bumper

-Open the trunk lid.
-in the opening of the trunk, Unscrew the screws that secure the top.
-Unscrew the screws around the perimeter of the lower part (spun up).
-in the wheel wells, Unscrew the screws that secure the fender liner and bumper corners.

-release the latches in the wings (gently pull the corners towards you).
-we release the latches under the rear lights and in the opening of the trunk.
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment.
Tags: