BimmerCode 4.19.0-11402 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 9-10-2023, 01:53 | Programs for cars and diagnostics | Views: 1 180 | Comments: 1
Depending on the year of manufacture and body type, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
Front bumper
-open the hood.
-under the hood, unscrew the two screws, take out the five pistons, and remove the front bumper shield.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
Author: carsoftos777 | 2-10-2023, 01:31 | Programs for cars and diagnostics | Views: 1 463 | Comments: 0
Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
Author: carsoftos777 | 2-10-2023, 01:26 | Programs for cars and diagnostics | Views: 945 | Comments: 0
Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
-open the hood.
-under the hood we take out the pins that secure the radiator grille and the upper part of the bumper.
-take out the pistons (inserted from bottom to top) that secure the lower part.
-turn the wheels depending on which side we will disassemble.
-under the hood we take out the pins that secure the radiator grille and the upper part of the bumper.
-take out the pistons (inserted from bottom to top) that secure the lower part.
-turn the wheels depending on which side we will disassemble.
