VAG IMMO OFF [KSG DUMP TOOL]

Program with the comfort control unit (KSG) Passat B6/B7. A Windows application that allows you to decrypt and change various data from the EEPROM dump (ST95320) and, as a little twist, clone the KSG.

WARNING: Do not change any parameters without knowing them, as this may cause your Passat to fail. It is also important to always have a backup copy of the EEPROM.

The most interesting information for most people here will be the PIN. This is the WFS pin with which you can program keys, provided that they are prepared for the car. Programming a used key with VCDS/VCP is not easy. However, with this contact you can program a new ELV, if, for example, someone's old ELV turned out to be faulty.

Operation: The operation is quite simple. Use the "Open CCM dump" button to open the read dump. You can then change the data as you wish or just view it. If you know the 6 bytes of CS from the ECU, you can enter them above and use the "decrypt all" button to decrypt everything. It is not possible to decrypt all data with this TOOL using only the EEPROM dump. Yes, I know it is possible and how to do it, but I will not include it in the tool.

It is also possible to clone the property data, which is handy when swapping from B6 KSG to B7 KSG to use the 7N0 gateway functions 😉
Just open the old and new dump and write the generated dump to the new KSG.

Reading the EEPROM:
The KSG is located behind the glove box. If you open it, you can read the EEPROM 95320. But be careful! Do not destroy the KSG, handle it carefully, without it your Passat will not start. Do not write any other dumps to the EEPROM.

Reading via OBD is impossible regardless of the program (VVDI, AVDI, etc.)! The only option is to read the EEPROM using a programmer and a clamp.


Tags: