Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Page 201


Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
The program is designed to ensure the operation of the electrical system in the CAN network.
  • LIKE
  • 1
How to remove the front and rear bumper of a Chevrolet Cruze


-open the hood.
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-turn the wheels to the left or right, depending on which side we will disassemble first.
  • LIKE
  • 1
Author: carsoftos777 | 16-04-2024, 03:01 | Programs for cars and diagnostics | Views: 594 | Comments: 0


Programming transponder keys for Ford Fiesta 2006-2009 and SIM210 ECU synchronization utility.
  • LIKE
  • 1
Author: carsoftos777 | 16-04-2024, 02:55 | Programs for cars and diagnostics | Views: 2 436 | Comments: 0


Data Explorer Manager is a useful software that provides important tools and information for your vehicle's ECU.
  • LIKE
  • 1
Author: carsoftos777 | 16-04-2024, 02:46 | Programs for cars and diagnostics | Views: 1 020 | Comments: 0


Description: The SCANIA MULTI program contains information about spare parts for Scania cars and buses.
All information is presented starting from 1985, for trucks, chassis and buses of the SCANIA series,
for all regions (differ in equipment and design).
  • LIKE
  • 1


Depending on the year of manufacture, the mounting locations may vary slightly.
Below are the bumper mounting diagrams. The arrows indicate the locations of the screws, pins and latches.
  • LIKE
  • 1
Author: carsoftos777 | 16-04-2024, 02:32 | Programs for cars and diagnostics | Views: 577 | Comments: 0


Description: RENAULT diagnostics with ELM327.
For the application to work properly, an ELM327 adapter with hardware version 1.5 is required, which must support Flow Control.
  • LIKE
  • 1


A program for recalibrating the CM from the car's ECU.
  • LIKE
  • 1
Author: carsoftos777 | 16-04-2024, 02:18 | Programs for cars and diagnostics | Views: 1 014 | Comments: 0


A program for VAG cars that allows you to:
1. Link a new dashboard using the ECU dump
2. Change PIN, VIN, checksum and MAC in dashboard and ECU dumps
3. Replace the ECU block and transfer data from the old block
4. Enable or disable immo on EDC16 units
5. Register keys or erase
  • LIKE
  • 1


Bumper mounting diagrams.
  • LIKE
  • 1