Depending on the year of manufacture, the mounting locations may vary slightly.
-open the hood.
-under the hood, Unscrew the four screws that secure the radiator grille.
-remove the radiator grille (the bottom is held on by latches).
-under the radiator grille, Unscrew the four screws.
-from the bottom, unscrew the nine screws (twisted from bottom to top) that secure the bottom of the bumper and the fender trim.
-turn the wheels to the side.
-we release the fender linings from the bumper (they are held on by latches, we pull them towards ourselves).
-in the wheel arches, Unscrew the screws that secure the fender liners.
-behind the fender liners, Unscrew the screws that secure the corners of the bumper to the wings (twisted from bottom to top).
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper forward (watch the wires and hoses).
-we release the connectors of the electrical equipment (if any).
-disconnect the headlight washer hoses (if any, liquid may leak).
Rear bumper
-open the trunk lid.
-open the plugs in the side trims of the trunk.
-behind the plugs, unscrew the plastic nuts and pull out the rear lights.
-under the rear lights, unscrew two screws and take out one piston on each side.
-unscrew the screws along the perimeter of the lower part of the bumper (twisted from bottom to top).
-unscrew one screw on each side (twisted from bottom to top) and release the fender covers from the bumper (they are held on by latches, pull towards you).
-in the wheel arches, unscrew the screws that secure the fender liners (rear part).
-Unscrew the screws that secure the corners of the bumper to the wings.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches in the trunk opening.
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment (if any).

- 1
Tags: