Главная > How To Remove Bumpers > How to remove front and rear bumper VW Polo (after 2009)
How to remove front and rear bumper VW Polo (after 2009)18-04-2025, 21:57. Posted by: carsoftos777 |
![]() -turn the wheels to the side depending on which side you will disassemble first. -in the wheel arches, unscrew the screws that secure the fender liners. -move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the bumper to the fenders. -under the hood, unscrew the headlight mounting screws and move the headlights forward from the lower mounts. -unscrew the two screws on the edges of the radiator grille (screwed from top to bottom). ![]() -unscrew the screws around the perimeter at the bottom of the bumper (screwed from the bottom up). -release the bumper from the latches, two under the headlights and four on the radiator grille. -with an assistant, pull the edges of the bumper to the sides, tearing it off the latches, and pull it forward. -remove the connector from the parking sensors (if any). -disconnect the headlight washer hoses (if any). To prevent liquid from leaking out of the tank, you will need to plug the hoses with plugs or bend them. -remove the connector from the fog lights (if any).
|