How to remove the front and rear bumper Skoda Yeti
21-08-2024, 16:12. Posted by: carsoftos777
The bumper consists of two parts that are connected with clamps, they are removed simultaneously. Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
-Unscrew two screws under the hood and pull out four pistons (screwed from top to bottom) that secure the radiator grille.
-Unscrew the screws and pull out the pistons along the perimeter at the bottom (inserted and screwed from bottom to top).
-Unscrew the wheels to the left or right, depending on which side you will disassemble first.
-in the wheel arches, unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew two screws on each side of the fenders (screwed from top to bottom), which secure the corners to the fenders.
-unscrew one screw on each side in the side decorative grilles of the lower part of the bumper.
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if any).
-remove the connector from the fog lights.
-if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the tank.
Rear bumper
Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
- open the trunk lid and unscrew two screws on each side that secure the taillights.
- remove the taillights by moving them toward you (the opposite sides of the lights are held in place by latches).
- remove the covers under the taillights (they are held in place by latches).
- unscrew the nuts under the covers.
-pull out the pins at the bottom (inserted from the bottom up).
-unscrew the screws in the wheel arches that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
-move the mudguards to the side and pull out one pin on each side (inserted from the bottom up).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if any).
come back