Главная > How To Remove Bumpers > How to remove the front and rear bumper of a SEAT Alhambra (after 2011)
How to remove the front and rear bumper of a SEAT Alhambra (after 2011)3-07-2024, 21:06. Posted by: carsoftos777 |
![]() Depending on the year of manufacture and model variant, the mounting locations may vary slightly. The bumper is removed along with the radiator grille. -under the hood, Unscrew the two screws (twisted from top to bottom) that secure the radiator grille. -unscrew the screws and pull out the caps along the perimeter at the bottom (inserted and twisted from bottom to top). -we unscrew the wheels to the left or right, depending on which side you will disassemble first. -in the wheel arches, Unscrew the screws that secure the fender liners. ![]() -move the fender liners to the side and Unscrew one screw on each side (twisted from top to bottom) that secure the corners to the wings. -with an assistant, pull the edges to the sides and pull the bumper off the guides towards you. -remove the connector from the parking sensors (if equipped). -remove the connector from the fog lights. - if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the reservoir.
|