Главная > How To Remove Bumpers > How to remove the front and rear bumper of a VW Passat B5
How to remove the front and rear bumper of a VW Passat B527-02-2024, 01:33. Posted by: carsoftos777 |
![]() -under the hood, Unscrew the screws that secure the radiator grille. -remove the lower part of the radiator grille from the latches. -if the grille needs to be removed completely, remove the hood opening lever. We tilt the latch upward and use a flat screwdriver to separate the ears that secure the lever to the lock. -under the grille, Unscrew the screws under the asterisk. ![]() -remove the direction indicators. Behind the headlights, remove the springs with hooks and push the direction indicators into the front from the guides. -Unscrew the screws under the direction indicators. -we unscrew the wheels to the left or right, depending on which side you will disassemble. -in the wheel arches, Unscrew the screws that secure the fender liners to the bumper. -move the fender liners to the side and Unscrew the screws that secure the bumper to the wings. -Unscrew the lower screws that secure the bumper to the engine protection. ![]() -pull the bumper from the guides to the front (it’s better to do this with an assistant so as not to scratch the paint on the wings). -now you can disconnect the connectors from the fog lights and (if any). -remove the connector from the parking sensors (if equipped). - if there are headlight washers, disconnect the hoses from the injectors and close them with plugs so that liquid does not leak out of the reservoir.
|