How to remove the front and rear bumper of a VW Golf 2 (Jetta 2)
25-01-2024, 01:52. Posted by: carsoftos777
To remove the front bumper, you need to “hang the engine” using a jack; to do this, place a wooden block between the engine and the jack and lift it so that the weight of the engine falls on the jack.
-from under the car, unscrew two bolts on each side (you only need to unscrew those bolts indicated by the arrows)
-pull the bumper off the guides towards you.
Rear bumper
-from under the car, unscrew two bolts on each side (twisted from bottom to top).
-pull the bumper back from the guides.
-bumper removed.
come back