VAG K+Can Commander 3.6 Full
9-08-2021, 01:00. Posted by: carsoftos777
VAG K + CAN Commander 3.6 Full (Vag Commander) is a tool for changing odometer readings on VAG group cars, namely Volkswagen, AUDI, SEAT, Skoda, which were released before September 2006 (AUDI to 2007). Communication with the car is supported via the K-line and CAN-bus, using the KWP2000 or UDS protocol. Also, VAG CAN Commander 3.6 supports the function of key binding, reading the immobilizer login, resetting the crash date in some airbag units. The device works with non-encrypted (dump is not encrypted) panels and some encrypted ones.
Functions of VAG K + CAN Commander 3.6:
Work on the K line, CAN, UDS
Diagnostics of auto blocks - identification, coding, reading / erasing errors, adaptation, etc .;
Odometer correction;
Reading Security Access Code / Login WFS.
Read / write immobilizer data.
Read / Write EEPROM of Instrument Panel / Immobilizer
Turn on / off TV / Video viewing on the go
Read / write EEPROM of control units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8, Porsche.
Prescribing keys (security code is not required).
Reading flash memory EDC16x, EDC15x, ME7x, MED951, MED751
Clearing "crash data memory" errors in AirBag
come back