TECU v3.7.0.11 diagnostic program
2-08-2021, 17:28. Posted by: carsoftos777
TECU v3.7.0.11 is designed to diagnose almost all cars. Works with both regular K-line adapter and ELM327 adapter.
At the moment, the program supports diagnostics of the main blocks of Toyota cars starting somewhere in 1996 (when the K-line appeared on the car) and around 2006 (before cars switched to the CAN bus). I would like to draw your attention to the fact that for Toyota there are diagnostic modules for hybrid vehicles in the program. For Toyota, all protocol parameters are taken from the dealer-level program - Techstream. In addition to Toyota, the program has support for diagnostics of Nissan vehicles (so far through the K-line). The protocol for Nissan has been collected bit by bit from various sources and is currently from the dealer's CONSULT-III instrument. For Daihatsu vehicles with HC-EJ engine, the protocol is taken from a multiscanner that supports this type of engine.
Thus, the following modules are implemented in the program:
1. Toyota EFI, ABS, EMPS, SRS, HV (2 Options), HVBAT (2 Options) (on line 7).
2. Nissan EFI (2 options), ABS, SRS, AT, BCM, HLL (2 options) (on line 7).
3. Nissan EFI (2 options), ABS (2 options), AT, CVT, ASCD (cruise control), 4WD and SRS (on lines 12.13).
4. Nissan EFI, CVT (via CAN lines 6.14).
5. Daihatsu EFI, ABS and SRS for HC-EJ engine (on line 7).
All modules for KLine, Consult-I, K + CAN Commander 1.4 and NISSAN 3LINE adapters.
come back