Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
The program is designed to ensure the operation of the electrical system in the CAN network.
The software is used for troubleshooting, adjusting customer preferred parameters, performing calibrations, performing upgrades affecting the electrical system, and updating control unit software.
Installation
1. Install Adobe Reader from Adobe website.
2. Run as administrator 1.cmd. Press any key. To restart a computer. (Test Mode will now always be written on the desktop)
3. Install Scania Diagnos & Programmer 3 2.46.1 and additional programs that will be installed by themselves.
4. After finishing, from the Driver folder corresponding to your Windows (x32 or x64) run _install.exe. Agree to install the unsafe driver.
5. Run Hardware ID Reader.exe and copy the code.
6. Run Protection REG.exe -> Paste the copied code into the upper wide Fingerprint field -> Click Decode Fingerprint -> Generate.
A file with the .reg extension (register data) will appear in the installation folder. We launch it and confirm the message.
7. Copy two files from the Fix folder to the folder with the installed program.
8. Run Time.exe and click the Crack button.
9. Restart your computer.
To upgrade from a previous version, follow only steps 3 and 7.
If an error occurs during installation, uninstall Kvaser Can Driver WHCP and repeat step 3.
For diagnostics, you need a VCI2 or VCI3 adapter
Year / Release Date: 2021
Version: 2.46.1
Interface language: Multilingual
come back
|
