Description: The Offboard Diagnostic Information System diagnostic software is a program that supports SAE J2534 (Diagnostic Interface) compliant interface. This software allows you to diagnose all Volkswagen, Audi, Skoda, Seat, Bentley and Lamborghini vehicles.
The following VAS diagnostic interfaces are supported:
VAS 6154 (supports WLAN) (Windows 7 + Windows 10)
VAS 5054A (Bluetooth radio) (Windows 7)
VAS 5055 (USB cable) (Windows 7)
For commissioning, the corresponding unit must be connected to the diagnostic tester via the USB connector and the corresponding drivers must be installed before starting ODIS Service. Administrator rights may be required to install the software.
Installation
ODIS 5.1.3 installation guide:
1.install the windows update from folder 01. Windows Update by selecting the 32x 64x file system
2. Run the ODIS installation on behalf of the ADMINISTRATOR from the folder: 02. OffboardDiagSetup (installation is not necessary on the C: \ drive)
Specify the license.dat license file required during installation, folder: 03. Launcer + license + plugins
After finishing the ODIS installation, copy the files with the replacement: OffboardDiagLauncher.exe to the ODIS installation directory,
de. volkswagen. odis. vaudas. launcher_4.50.0.jar to plugins folder
3. Unzip from folder: 04. Patch Files,
in accordance with the computer file system,
32 bits or 64 bits (error "ODS2522E" will occur if you skip this step).
Copy the extracted files to the folder C: \ Program Files \ Softing \ D-PDU API \ 1.20.042 \ VeCom \ VAS5054 with replacement
4. Unpack archives, from the first 05. PostSetup_79.0.50.part01 to 05. PostSetup_79.0.50.part21 completely, we do not change the name of the folder 05. ODIS-Service_update_5_1_3
5. We start ODIS on behalf of the ADMINISTRATOR, when updating, specify the path to the folder 05. ODIS-Service_update_5_1_3
6. After a long update of the program, ODIS asks to restart the computer, we reboot.
7. We don’t start the car.
First, insert the mini USB into the 5054a adapter,
5054a adapter we connect to the car,
We connect the USB wire to the USB of the computer. Windows will detect the adapter and install drivers for it.
We start ODIS on behalf of the ADMINISTRATOR.
Add. Info: Used PassThru (VCI) devices with SAE J2534 compliant interface must be approved for communication with ODIS Service. In ODIS select tool, then VCI interface.
Year / Date of Issue: 06/2019
Version: 5.1.3
System Requirements: To use the Offboard Diagnostic Information System software, the following conditions must be met:
Operating system: Microsoft® Windows 7 (32x64 bit) / Windows 10 (64 bit) with Internet Explorer 11
Interface language: Multilingual
come back
|
