How to Remove Front and Rear Bumper Pontiac Montana (1997-2004)

Front bumper
- open the hood.
- unscrew one nut on each side and pull out the turn signals.
- under the turn signals, pull out one piston on each side.

- pull out the pistons and unscrew the screws that secure the lower part.
- turn the wheels to the side.
- in the wheel arches, unscrew the screws and release the mudguards (front part).

- behind the mudguards, unscrew one screw on each side that secure the corners of the bumper to the fenders.
- with an assistant, pull the bumper forward (look for the wires).
- remove the connector from the fog lights (if any).

-open the trunk lid.
-pull out the pins in the trunk opening that secure the upper part.
-unscrew the screws and pull out the pins from the bottom (screwed and inserted from the bottom up).

-unscrew the screws in the wheel arches that secure the mudguards and bumper corners.
-with an assistant, pull the bumper back from the guides (watch the wires).
-remove the connectors from the electrical equipment (if any).