How to remove front and rear bumper VW Sharan (2010)

-turn the wheels to the side and unscrew the screws that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side in the corners (screwed from the bottom up).
-unscrew the five screws at the bottom (screwed from the bottom up).
-Under the hood, unscrew the three screws and remove the radiator grille (pull the lower part forward from the latches).

-Under the grille, release the bumper from the latches with a flat screwdriver (indicated by black
arrows).
-With an assistant, pull the edges to the sides and pull the bumper forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).

-remove the connector from the parking sensors (if any).
-disconnect the headlight washer hoses (if any). To prevent fluid from leaking out of the tank, you will need to plug the hoses with plugs or bend them.

-in the trunk, on the sides, remove the hatches. Under the hatches, remove the plugs, under the plugs, unscrew the screws securing the rear lights.
-remove the rear lights.
-under the rear lights, unscrew two nuts on each side (screwed from top to bottom).
-unscrew five screws at the bottom (screwed from bottom to top).
-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).

-unscrew one screw on each side in the corners behind the fender liners (screwed from the bottom up).
-with an assistant, pull the edges to the sides and pull the bumper back from the guides.
-remove the connector from the parking sensors (if any).