How to Remove Front and Rear Bumper Pontiac Solstice
20-04-2025, 03:16. Posted by: carsoftos777
Front bumper
- open the hood.
- under the hood, take out the pins that secure the upper part.
- remove the turn signals (held on by latches).
- from the bottom side, unscrew the screws and take out the pins that secure the lower part.
- turn the wheels to the side.
- in the wheel arches, unscrew the screws and release the fender liners (front part).
-move the fender liners to the side and unscrew the screws that secure the bumper corners to the fenders.
-with an assistant, pull the bumper forward (watch the wires).
-disconnect the fog light connectors.
Rear bumper
-open the trunk lid.
-unscrew the eight screws that secure the upper part.
- remove the six pins that secure the lower part.
- remove the two screws behind the license plate.
- remove the three screws on each side of the wheel arches that secure the mudguards.
- remove the three screws on each side that secure the sides of the bumper to the fenders.
- release the clips in the fenders.
- carefully pull the bumper back with an assistant (watch the wires).
- disconnect the electrical equipment connectors.
come back