How to remove the front and rear bumper Skoda Citigo
14-04-2025, 04:25. Posted by: carsoftos777
Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
- open the hood and unscrew the three screws that secure the radiator grille (screwed from top to bottom) and release it from the clips.
- unscrew the wheels to the left or right, depending on which side you will disassemble.
- in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
-move the mudguards to the side and unscrew one screw on each side that secure the bumper to the fenders (screwed from the bottom up)
-pull out the pins at the bottom (inserted from the bottom up).
-pull the edges to the sides, releasing them from the latches, and pull the bumper forward from the guides.
-remove the connectors from the fog lights (if any).
-if there are headlight washers, disconnect the hose and plug it with a plug so that the liquid does not leak out of the tank.
-remove the connector from the parking sensors (if any).
Rear bumper
-in the trunk, in the side trims, remove the hatches opposite the rear lights.
-under the hatches, unscrew the nuts and remove the rear lights.
-unscrew the four screws in the trunk opening.
-in the wheel arches, unscrew the screws that secure the bumper to the fenders (screwed from the bottom up).
-in the lower part, pull out the pins (inserted from the bottom up).
-tear off the corners from the latches under the wings.
-release the clips under the rear lights.
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the license plate light.
-remove the connector from the parking sensors (if any).
come back