How to remove front and rear bumper Saab 9-5 II (2010-2012)
5-04-2025, 04:13. Posted by: carsoftos777
-open the hood.
-under the hood, take out six pins (screws) that secure the upper part.
-from the bottom, unscrew six screws (pins) that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, unscrew three screws on each side that secure the fender liners and bumper corners.
-release the latches in the fenders (pull the corners toward you).
-with an assistant, pull the bumper forward (look for wires and hoses).
-disconnect the electrical equipment connectors (if any).
-disconnect the headlight washer hoses (if any).
Rear bumper
-open the trunk lid.
-remove the taillights.
-pull out two pins from the bottom and unscrew two nuts.
-in the wheel arches, unscrew three screws on each side that secure the fender liners and the sides of the bumper.
-release the latches in the fenders (pull the corners towards you).
-release the latches under the taillights and in the trunk opening.
- with an assistant, carefully pull the bumper back (watch the wires).
- disconnect the electrical equipment connectors (if any).
come back