How to Remove Front and Rear Bumper Toyota Celica (1999-2006)
27-03-2025, 03:17. Posted by: carsoftos777
-open the hood and unscrew the screws (screwed from top to bottom) that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part and pull out the pins (screwed and inserted from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, unscrew the screws that secure the fender liners.
-move the fenders to the side and unscrew one screw on each side that secure the corners to the fenders and two nuts on each side under the headlights.
-with an assistant, remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
Rear bumper
-open the trunk lid and remove the rear and side trims.
-unscrew four nuts under the rear trim (you will need a head with a ratchet).
-unscrew one screw under the side trims in the wings (screwed from top to bottom) and one nut under the taillights on each side.
-in the wheel arches, pull out the pins that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secure the corners to the fenders.
-unscrew the screws around the perimeter at the bottom (screwed from the bottom up).
-with an assistant, release the bumper from the latches in the fenders and pull it off the guides towards you.
come back