How to Remove Front and Rear Bumper Toyota RAV4 SXA10 (1994-2000)
14-03-2025, 02:13. Posted by: carsoftos777
-open the hood and pull out the pins under the radiator grille (inserted from top to bottom).
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, unscrew the screws that attach the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side that attach the corners of the bumper to the fenders.
-with an assistant, release the corners from the latches in the wings and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
-if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).
Rear bumper
-open the trunk lid and unscrew two screws on each side in the opening.
-in the wheel arches, unscrew the screws that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew them with a ratchet with a nozzle) and unscrew one screw on each side that secure the corners of the bumper parts to the fenders (screwed from the bottom up).
-unscrew the screws at the bottom (screwed from the bottom up).
-with an assistant, release the bumper parts from the latches in the fenders and remove them towards you.
-remove the connector from the parking sensor (if any).
come back