How to remove the front and rear bumper Renault Twingo 2 (2007-2014)
14-03-2025, 00:45. Posted by: carsoftos777
-open the hood.
-under the hood, unscrew the screws that secure the upper part
-unscrew the screws around the perimeter of the lower part that secure the protection.
-turn the wheels to the side.
-in the wheel arches, unscrew the screws and release the fender liners (front part).
- behind the fenders, unscrew one screw on each side that secure the corners of the bumper to the fenders.
- release the latches in the fenders (pull the corners towards you).
- pull the bumper forward (look at the wires).
- disconnect the electrical equipment connectors (if any).
Rear bumper
- open the trunk lid.
- remove the taillights.
- unscrew the screws that secure the upper part.
- from the bottom side, unscrew the three screws that secure the lower part.
- in the wheel arches, release the mudguards.
- behind the mudguards, unscrew one screw on each side that secure the corners of the bumper to the fenders.
- release the latches in the fenders (pull the corners towards you).
- with an assistant, pull the bumper back (look for the wires).
- disconnect the license plate light connectors.
come back