How to Remove Front and Rear Bumper Suzuki Splash
31-01-2025, 21:25. Posted by: carsoftos777
-open the hood.
-under the hood, unscrew the screws and pull out the pins that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-turn out the wheels depending on which side we are going to disassemble.
-free the fender liners in the wheel arches.
-behind the fender liners, unscrew one screw on each side that secures the corners of the bumper to the fenders.
-release the latches in the fenders (pull the corners towards you).
-with an assistant, carefully pull the bumper forward (be careful not to tear the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, unscrew the screws that secure the upper part.
-pull out the pins along the perimeter of the lower part.
-in the wheel arches, unscrew one screw on each side that secure the corners of the bumper to the fenders.
-release the latches in the fenders (pull the corners of the bumper towards you) and under the taillights.
-with an assistant, carefully pull the bumper back.
-disconnect the electrical equipment connectors (if any).
come back