How to remove the front and rear bumper of a Suzuki Jimny (since 1998)
20-01-2025, 02:50. Posted by: carsoftos777
-open the hood.
-under the hood, take out the pins that secure the upper part of the bumper.
-unscrew the screws (screwed from the bottom up) that secure the lower part.
-turn out the wheels depending on which side we are going to disassemble.
-in the wheel arches, unscrew the screws that secure the fender liners and bumper corners to the fenders.
- with an assistant, carefully pull the bumper forward (be careful not to tear the wires).
- remove the connectors from the electrical equipment (if any).
Rear bumper
- open the back door.
- in the trunk opening, unscrew two screws on each side and pull out the taillights.
- under the taillights, unscrew one screw on each side.
- unscrew the three screws in the trunk opening that secure the upper part.
- unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
- in the wheel arches, unscrew the screws that secure the mudguards.
- unscrew one screw on each side that secure the corners of the bumper to the fenders.
- with an assistant, carefully pull the bumper back from the guides.
- disconnect the electrical equipment connectors (if any).
come back