How to remove the front and rear bumper Opel AGILA A (2000 – 2008)
29-12-2024, 02:53. Posted by: carsoftos777
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and take out the pins that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
-under the hood, pull out the pins and unscrew the screws (screwed and inserted from top to bottom), which secure the upper part.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-with an assistant, release the corners from the latches and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
Rear bumper
-open the trunk lid.
- in the trunk opening, unscrew two screws on each side that secure the taillights and the screws that secure the bumper.
- remove the taillights and unscrew one screw on each side in the corners.
- unscrew the screws in the wheel arches and pull out the pins that secure the mudguards to the bumper.
- move the mudguards to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
- unscrew the screws around the perimeter at the bottom (screwed from the bottom up).
- with an assistant, remove the bumper towards yourself.
- remove the connector from the parking sensors (if any).
- remove the connectors from additional equipment (if any).
come back