How to remove the front and rear bumper Suzuki Swift (2004-2017)
22-12-2024, 01:07. Posted by: carsoftos777
-open the hood.
-under the hood, unscrew the screws and pull out the pins that secure the upper part of the bumper.
-along the perimeter of the lower part, unscrew the screws and pull out the pins (screwed in and inserted from the bottom up).
-turn the wheels to the side.
-in the wheel arches, unscrew the screws (there may be pins) and release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the fenders.
-release the latches in the fenders (pull the corners towards you).
-with an assistant, carefully pull the bumper forward (be careful not to tear the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
- in the trunk opening, unscrew the two screws that secure the upper part.
- around the perimeter, unscrew the screws (there may be pins) that secure the lower part.
- in the wheel arches, unscrew the screws and release the fender liners.
- behind the fender liners, unscrew one screw on each side that secure the corners of the bumper to the fenders.
- release the latches in the fenders (pull the corners of the bumper towards you) and under the taillights.
- with an assistant, carefully pull the bumper back.
- disconnect the electrical equipment connectors (if any).
come back