How to remove the front and rear bumper Suzuki Ignis (2000-2006)
19-12-2024, 03:49. Posted by: carsoftos777
-open the hood.
-under the hood, take out the pins that secure the radiator grille and the upper part of the bumper.
-unscrew the screws and take out the pins (screwed in and inserted from the bottom up), which secure the lower part.
-turn out the wheels depending on which side we are going to disassemble.
-in the wheel arches, unscrew the screws and release the fender liners.
-unscrew one screw on each side that secure the corners of the bumper to the fenders.
-with an assistant, carefully pull the bumper forward (be careful not to tear the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
- in the trunk opening, unscrew four screws
- along the perimeter of the lower part, unscrew the screws (screwed from the bottom up).
- in the wheel arches, unscrew the screws that secure the mudguards.
- unscrew one screw on each side that secure the corners of the bumper to the fenders.
- with an assistant, carefully pull the bumper back from the guides.
- disconnect the electrical equipment connectors (if any).
come back