How to remove the front and rear bumper Chrysler 300M (Concorde)
17-12-2024, 04:07. Posted by: carsoftos777
- under the hood, pull out the pins (inserted from top to bottom), which secure the upper part.
- pull out the pins along the perimeter in the lower part (inserted from bottom to top).
- turn the wheels to the left or right, depending on which side you will disassemble.
-in the wheel arches we pull out the pins and release the fender liners.
-(if any)behind the fender liners we unscrew one screw on each side (screwed from the bottom up), which secure the corners.
-(if any) there are holes in the fender liners, through which, according to the instructions (using a long ratchet), you need to unscrew the nuts under the headlights, in practice it is more convenient to move the fender liners to the side
-with an assistant, pull the bumper off the guides towards you.
-remove the connectors from the electrical equipment (if any).
-disconnect the headlight washer hoses (if any).
Rear bumper
come back