How to remove the front and rear bumper Peugeot 1007
11-12-2024, 03:59. Posted by: carsoftos777
-turn the wheels to the side.
-in the wheel arches, pull out the pins and release the fender liners.
-behind the fender liners, unscrew one screw on each side (screwed from the bottom up), which secure the corners of the bumper to the fenders.
-open the hood.
-under the hood, unscrew the screws that secure the upper part.
-unscrew the screws along the perimeter of the lower part and pull out the pins.
-release the latches in the wings (you need to press the clamps).
-with an assistant, carefully release the bumper from the latches and pull it forward (be careful not to tear the wires).
-remove the electrical equipment connectors.
Rear bumper
-open the trunk lid.
-remove the rear lights.
-unscrew the screws behind the rear lights.
-unscrew the screws along the perimeter of the lower part.
- in the wheel arches, we release the mudguards,
- we release the latches in the trunk opening.
- with an assistant, we remove the bumper back from the guides (we are careful not to tear the wires).
- we remove the connectors from the electrical equipment.
come back