How to Remove Front and Rear Bumper Chrysler Town & Country (Voyager) (2008-2016)
10-12-2024, 05:00. Posted by: carsoftos777
-under the hood, unscrew the screws and pull out the pins (screwed and inserted from top to bottom), which secure the upper part of the bumper and the radiator grille.
-pull out the pins (inserted from bottom to top) along the perimeter at the bottom.
-turn the wheels left or right, depending on which side you will disassemble.
-in the wheel arches, unscrew the screws and release the fender liners.
-Unscrew one screw on each side behind the fender liners that secure the corners to the fenders.
-With an assistant, release the latches and carefully pull the bumper towards you.
-Remove the connectors from the fog lights (if any).
-If there are headlight washers, disconnect the hoses.
-Disconnect the parking sensor connector (if any).
Rear bumper
- in the wheel arches we unscrew three screws on each side that secure the fender liners (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
- open the trunk lid and unscrew two screws on each side in the opening.
- in the lower part, pull out the pins (inserted from the bottom up), which secure the lower part.
- with an assistant, carefully pull the bumper towards you from the guides.
- on the right side, disconnect the parking sensor connector (if any).
come back