How to Remove Front and Rear Bumper Cadillac Seville (1998-2004)
8-12-2024, 01:17. Posted by: carsoftos777
-turn the wheels to the side.
-unscrew the screws in the wheel arches and release the fender liners.
-move the fender liners to the side and unscrew two screws (screwed from the bottom up) and two nuts that attach the sides to the fenders.
-pull out the pins that secure the engine protection.
Opposite the radiator, top and bottom, unscrew the screws that secure the bumper to the amplifier.
-with an assistant, remove the bumper.
Rear bumper
-in the wheel arches, pull out the pins and release the fender liners.
-behind the fender liners, unscrew the screws that secure the corners to the fenders.
-unscrew the screws (screwed from the bottom up) that secure the lower part.
-open the trunk lid.
-in the trunk, remove the rear and side trim.
-from the trunk, behind the trim, unscrew four screws and seven nuts.
-with an assistant, pull the bumper back.
come back