How to remove front and rear bumper Toyota Verso
21-11-2024, 23:38. Posted by: carsoftos777
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and pull out the pins that secure the fender liners to the bumper.
-unscrew the screws under the hood and pull out the pins (screwed in and inserted from top to bottom) that secure the upper part.
-unscrew the screws along the perimeter of the lower part and pull out the pins (screwed in and inserted from bottom to top).
-with an assistant, release the corners from the latches in the fenders and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
-if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).
Rear bumper
-open the trunk lid.
-in the trunk opening under the rear lights, pull out the plugs and unscrew the screws.
- in the wheel arches, unscrew the screws and pull out the pins that attach the fender liners to the bumper.
- along the perimeter in the lower part, pull out the pins (inserted from the bottom up).
- with an assistant, release the bumper from the latches in the fenders, under the taillights and in the trunk opening, remove it from the guides towards you.
Toyota Verso rear bumper mounting diagram - remove the connector from the parking sensors (if any).
- remove the connectors from the additional equipment (if any).
come back