How to remove the front and rear bumper Renault Kadjar
20-11-2024, 00:18. Posted by: carsoftos777
-open the hood.
-pull out four pistons under the hood that secure the radiator grille.
-unscrew twelve screws from the bottom (screwed from the bottom up) that secure the bottom of the bumper.
-turn out the wheels, depending on which side we are disassembling.
-unscrew two screws on each side in the wheel arches that secure the fender liners.
-release the arch linings from the bumper (they are held in place by latches, pull them towards you).
-unscrew one screw on each side behind the fender liners (screwed from top to bottom) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners towards you, if they don't unclip, gently press the clips between the wing and the bumper with a flat screwdriver).
-with an assistant, pull the bumper forward (be careful not to tear the wires).
-remove the fog light connectors on the left side (if any).
Rear bumper
-open the trunk lid.
-unscrew two screws on each side in the trunk opening and one from the trunk (you need to open the hatches in the side trims).
-pull out the taillights.
-unscrew the four screws in the trunk opening that secure the upper part.
-unscrew the seven screws (screwed from the bottom up) that secure the lower part.
-release the wing linings (held by latches, pull them towards you).
-in the wheel arches, unscrew the screws that secure the mudguards and bumper corners.
-remove the license plate and unscrew the two screws underneath it.
-release the latches in the fenders (pull the corners toward you) and under the taillights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect the electrical equipment connectors.
come back