How to remove the front and rear bumper Renault Clio 4 (2012-2019)
26-09-2024, 18:32. Posted by: carsoftos777
-open the hood.
-under the hood, take out the six screws that secure the upper part.
-disconnect the hood lock cable.
-from the bottom, unscrew the eight screws (screwed from the bottom up), which secure the engine protection.
-depending on which side we are disassembling, turn out the wheels.
-in the wheel arches, release the fender liners (no need to remove).
- behind the fenders, unscrew one screw on each side (screwed from the bottom up), which secure the corners of the bumper to the fenders.
- release the latches in the fenders (pull the corners towards you).
- pull the bumper forward (be careful not to tear the wires).
- remove the fog light connectors on the left side (if any).
Rear bumper
- open the trunk lid.
- in the trunk opening, unscrew two screws on each side and pull out the taillights towards you (they sit tightly on the latches).
- remove the covers under the taillights and unscrew one screw on each side.
- unscrew the trunk lid stops.
- unscrew the five screws (screwed from the bottom up) that secure the lower part.
- unscrew one screw on each side in the wheel arches and release the mudguards (no need to remove).
- move the mudguards to the side and unscrew one screw on each side that secure the bumper corners to the fenders.
- release the latches in the fenders (pull the corners towards you).
- pull the bumper back (look at the wires).
- disconnect the license plate light connectors.
come back