How to remove the front and rear bumper of a Chevrolet HHR
12-09-2024, 17:11. Posted by: carsoftos777
-open the hood.
-unscrew four screws in the opening between the headlights.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, pull out two pistons and unscrew one screw on each side, which secure the fender liners.
-pull out the pistons (inserted from the bottom up), which secure the lower part.
-release the latches in the fenders and next to the headlights (pull the corners towards you). If they don't budge, you need to pry the tabs with a thin screwdriver (be careful not to damage the paint).
-pull the bumper forward (be careful not to tear the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-unscrew one screw on each side in the trunk opening.
-pull out two pins at the bottom (inserted from bottom to top).
-pull out three pins on each side in the wheel arches.
- unscrew one screw on each side (screwed from the bottom up), which fasten the corners to the fenders.
- release the latches in the fenders (pull the corners towards you). If the latches do not give in, you need to press the tabs through the gap between the bumper and the fender with a flat thin screwdriver.
- remove the bumper back (be careful not to tear the wires).
- remove the connectors from the electrical equipment.
come back