How to Remove Front and Rear Bumper Toyota Camry XV40 (2006-2011)
11-09-2024, 01:49. Posted by: carsoftos777
-under the hood, pull out seven pins and remove the plastic panel.
-under the panel, unscrew three screws and pull out two pins (screwed and inserted from top to bottom), which secure the upper part of the bumper.
-in the very bottom, unscrew six screws (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, pull out the pins that secure the fender liners.
-move the fender liners aside and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
-with an assistant, release the latches in the fenders and remove the bumper from the guides towards you.
-if there are headlight washers, disconnect the hoses (the hose will need to be bent or the liquid drained into some container).
-remove the connector from the parking sensors (if any).
- remove the connector from the fog lights (if any).
Rear bumper
Depending on the year of manufacture and type of model, the mounting locations may differ.
- open the trunk lid and pull out the plugs in the opening near the taillights.
- unscrew the screws under the plugs.
- unscrew the screws in the wheel arches that secure the fender liners.
- move the fender liners to the side and unscrew one screw on each side that secure the corners to the fenders.
-unscrew the screws around the perimeter at the bottom (screwed from bottom to top).
-with an assistant, release the bumper from the latches in the fenders and under the taillights, pull it off the guides towards you.
-if there is a parking sensor, remove the connector.
come back