How to remove the front and rear bumper Renault/Dacia Sandero (Sandero Stepway) 1 (2008-2012)
11-09-2024, 00:44. Posted by: carsoftos777
-open the hood.
-under the hood, unscrew the four screws (screwed from top to bottom), which secure the upper part of the bumper.
-from the bottom, unscrew the nine screws (screwed from bottom to top), which secure the lower part.
-depending on which side we are disassembling, turn out the wheels.
-in the wheel arches, unscrew one screw on each side (just below the wing).
-release the latches in the fenders (pull the corners towards you).
-with an assistant, pull the bumper forward (be careful not to tear the wires).
-disconnect the electrical equipment connectors (if any).
Rear bumper
-open the trunk lid.
- remove the taillights (depending on the year of manufacture).
- unscrew the four screws in the trunk opening.
- unscrew the screws that secure the fender liners to the bumper (in the wheel arches and from the bottom side).
- unscrew the three screws behind the bumper, from the bottom side (screwed from the bottom up).
- release the latches in the fenders (pull the corners towards you).
- with an assistant, pull the bumper back (look for the wires).
- disconnect the electrical equipment connectors (if any).
come back