How to remove the front and rear bumper Peugeot 605
22-08-2024, 01:24. Posted by: carsoftos777
-open the hood.
-under the hood, unscrew the screws (there may be pins) and remove the radiator grille.
-along the perimeter of the lower part, unscrew the screws and pull out the pins (screwed in and inserted from the bottom up), which secure the lower part.
-there are two options. Either unscrew two nuts on each side under the headlights, which secure the bumper reinforcement to the guides (hard to get to). Or unscrew one bolt on each side from the engine compartment, which secure the guides to the side members (the guides are hard to pull out).
-depending on which side we are going to disassemble, turn the wheels out.
-free the fender liners in the wheel arches.
-pull the bumper forward from the runners (be careful not to tear the wires and hoses).
-remove the connectors from the fog lights.
-(if any) disconnect the washer hoses (fluid may leak).
Rear bumper
-remove the rear wheels and fenders (it will be very inconvenient without removing the wheels).
-unscrew two screws on each side in the wheel arches that secure the corners to the fenders)
-open the trunk lid.
-unscrew two screws in the trunk and remove the rear trim.
-unscrew four screws behind the trim.
-from the bottom side, unscrew two screws and remove the license plate light connector.
-with an assistant, carefully pull the bumper back.
come back