How to remove the front and rear bumper Renault Safrane
21-08-2024, 22:34. Posted by: carsoftos777
- from the bottom side, unscrew the screws that secure the protection (screwed from the bottom up).
- depending on which side we are going to disassemble, turn out the wheels.
- in the wheel arches, release the fender liners.
- move the fender liners to the side and unscrew one screw on each side that secure the corners of the bumper to the fenders.
- release the clips in the fenders.
-with an assistant, pull the bumper forward (be careful not to tear the wires).
-disconnect the electrical equipment connectors (if any).
Rear bumper
-unscrew the screws in the wheel arches and release the fender liners.
-bend the fender liners to the side and unscrew one screw on each side that secure the corners of the bumper to the fenders.
-unscrew the screws that secure the lower part.
-open the trunk lid.
-remove the rear panel trim in the trunk.
-Unscrew the four screws behind the trim that secure the bumper reinforcement to the body.
-With an assistant, pull the bumper back (look for the wires).
-Disconnect the electrical equipment connectors (if any).
come back