How to remove the front and rear bumper SEAT Toledo III (2004-2009)
10-08-2024, 02:16. Posted by: carsoftos777
Depending on the model variant, the mounting locations differ.
-Unscrew four screws under the hood (screwed from top to bottom).
-Unscrew one screw on each side of the central decorative grille (models from late 2006 do not have these screws).
-Turn the wheels to the left or right, depending on which side we will disassemble first.
-Unscrew the screws in the wheel arches that secure the fender liners.
-Move the fender liners to the side and unscrew one screw on each side in the corners.
-Unscrew eight screws at the bottom (screwed from bottom to top).
-with an assistant, we tear off the corners from the latches and pull the bumper from the guides towards ourselves.
-remove the connector from the parking sensors (if any).
-remove the connector from the fog lights.
-if there are headlight washers, disconnect the hoses. To prevent the liquid from leaking onto the ground, you need to prepare a suitable container.
Rear bumper
Depending on the model variant, the mounting locations may differ.
- remove the plugs in the side trims.
- unscrew the mounting handles under the plugs and remove the taillights.
- unscrew two screws on each side under the taillights.
- unscrew the screws in the wheel arches that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
-move the mudguards to the side and unscrew one screw on each side (screwed from the bottom up).
-unscrew the screws along the perimeter at the bottom (screwed from the bottom up).
-with an assistant, tear off the corners from the latches and pull the bumper off the guides towards you.
-remove the connector from the license plate light.
-remove the connector from the parking sensors (if any).
come back